Fichet Monobloc Cylinder F3D a2p1*

Fichet
75051020

FICHET F3D A2P 1* one-piece cylinder

  • standard length 62mm outside + 50 mm inside
  • Available in extended version up to + 40 mm
  • For FICHET locks Vertipoint T, G371, G071, Forstyl+ S, Spheris S, Alicea S
  • Supplied with 4 keys and property card

My order

  • I have it I don't have it

You can view and delete your documents via your customer area

Documents will be automatically deleted from our server after order delivery

loader

Amount of options
Price with options
Total
Quantity

Buy in our shop

A2Pro

149, Avenue Henri Barbusse

93700 Drancy

Availability: Within 4 days

Frequently Asked Questions

To change a Fichet 787 or F3D lock cylinder to a monobloc version, here are the steps to follow. It's important to note that Fichet locks are often high-security, so make sure you have the necessary equipment before you start.

Equipment required:

  • A new Fichet 787 or F3D cylinder
  • Screwdrivers
  • Your lock key (for ease of handling)

Steps to follow:

Open the door:

Make sure the door is open before you start dismantling. This will give you better access to the lock and prevent any jamming.

Remove the cylinder fixing screw:

Remove accessories (handle, covers on surface-mounted locks)

On the side of the lock (usually behind a cover), there is a fixing screw that holds the cylinder in place. Use a screwdriver to remove this screw.

Behind this screw you will find a washer which you will need to lower slightly with a screwdriver.

With the door open, insert the key and make 2 turns in the closing direction and the central bolt will come out of its housing.

Be careful not to undo the mechanism on Fichet A2p 3 star locks.

Remove the cylinder:

Once the bolt has been removed, pull the cylinder to release it from its housing. If the cylinder is stuck, it is sometimes useful to slightly lift the release part with a screwdriver to free it.

Inserting the new cylinder :

Take the new Fichet 787 or F3D cylinder and insert it into the lock housing. Make sure it is properly aligned, then turn the key in the cylinder a quarter turn in the closing direction and replace the central bolt at the same time turn the key in the opening direction.

Fixing the cylinder :

Replace the fixing screw you removed and tighten it to hold the cylinder in its housing.

Testing the lock :

Test that the cylinder works correctly by inserting the key and turning to check that it opens and closes the door correctly.

Additional tips:

If you have difficulty removing or inserting the cylinder, it may be worth contacting us for advice to prevent damage to the lock.

Make sure the new cylinder is compatible with your Fichet 787 or F3D model. Sometimes it is necessary to order specially adapted parts to ensure correct installation.

If you are not comfortable with the process or if the lock is complex, call our A2pro.com customer service team and a technician will advise you.

To maintain a Fichet 787 (or F3D) lock cylinder, it's important to follow a few key steps to ensure it works properly and lasts longer. Here are the tips to follow:

1. Regular lubrication

Recommended products: Use specific lock lubricants, such as Teflon-based or graphite powder lubricants. Avoid oil- or silicone-based lubricants, as they can attract dust and damage the mechanism.

Application: Apply a small amount of lubricant to the lock by inserting the tip of the spray or bottle into the key hole, then turn the key several times to distribute the lubricant evenly throughout the cylinder. This will reduce friction and prevent premature wear.

2. Cleaning

Prevent the build-up of dust and dirt: If you notice any blockages or difficulty in turning the key, you can try cleaning the cylinder. Use compressed air (available from specialist shops) to blow away any dust and dirt that has accumulated in the lock.

Beware of damp: If your cylinder is exposed to damp conditions, such as outdoors, be sure to dry it thoroughly if water enters the mechanism.

3. Key inspection

Check the condition of your keys: Worn or damaged keys can prevent the cylinder from working properly. If a key is bent or shows signs of severe wear, it should be replaced or rekeyed. A damaged key can also damage the cylinder pins.

4. Preventive maintenance

Regular turning: Even if you don't use the lock very often, it's a good idea to turn the key at regular intervals to prevent the mechanisms from seizing up or jamming over time.

Frost protection: If you are in a cold region, protect your Fichet cylinder from frost. Moisture combined with cold can damage the mechanism. Use an anti-freeze spray specially designed for locks if necessary.

5. Check internal components

If your lock shows signs of malfunction (key difficult to turn, lock jamming), it may be necessary to call in a professional locksmith to inspect and possibly replace the pins or other internal components of the cylinder.

6. Protection against attempted break-ins

Fichet 787 and F3D cylinders are high security models, but it is always a good idea to ensure that the cylinder is not exposed to attempted break-ins. Use a cylinder protector if necessary to make it difficult for burglars to gain access.

Summary of steps :

Lubricate with a suitable product.

Clean regularly (blower, compressed air).

Inspect keys for wear.

Turn the key regularly.

Protect against damp and frost.

If necessary, consult a professional for in-depth maintenance.

By following these recommendations, you will ensure the longest possible life for your Fichet 787 or F3D cylinder while maintaining effective security.

Remaking a Fichet 787 OR F3D key requires a rigorous process, as these keys are often used for patented high-security systems.

 

 Here are the steps for rekeying a Fichet key:

1 / Bring the reproduction card linked to the key or a photo of the key if you buy online.

 

2 / Order it directly on our website a2pro.com or go to an approved FICHET dealer.

 

3 / Once the reproduction request has been sent to the factory by the dealer, production takes 8 working days.

 

4 / Collection of your key from our boutique or home delivery against signature or at a collection point.

 

5 / Reception and fitting of your key in the FICHET lock.

 

6 / Prices vary between 110 and 150 euros.

In the event of loss of FICHET key, here are the steps to follow to resolve the situation:

1. Check carefully

Look carefully in your belongings: pockets, bag, car, office, etc.

Go back to your last trips or places visited to check if you left your keys there.

2. Ask for help

Contact your loved ones: If someone you know has a duplicate of your keys, ask them to help you out.

Concierge or neighbor: If you live in a building, the concierge or a neighbor could have a duplicate key (if you gave them one).

3. Access to your home

If you are a tenant, contact your landlord: he may have a duplicate or guide you to resolve the problem.

Call a professional FICHET approved locksmith to avoid scams.

4. Security in the event of theft

If you think your keys have been stolen, change the cylinder quickly to avoid the risk of intrusion.

File a report of loss or theft with the police, especially if your keys are associated with documents containing your address.

informed your insurance company to open a claim file and get reimbursed.  

5. Prevention for the future

Make duplicates of your keys and give one to someone you trust.

Invest in modern solutions like connected locks or a tracker key ring (such as AirTag or Tile) to find your keys more easily.

  Secure payment via BNP Axepta
  Quick delivery and tracking link
  14 days to return the product
Product Details
  • Fichet
  • 75051020
  • F3D
  • Haute Sécurité
  • Round monobloc
  • Double input
  • 1 star
  • FICHET Forstyl S
    FICHET G071
    FICHET G171
    FICHET G371
    FICHET Spheris S
    FICHET Spheris XP
    FICHET Vertipoint T with rounded cylinder
  • 4
  • Fichet F3D
History and Reviews
Fichet Monobloc Cylinder F3D a2p1*
Reviews : 4
Average grade :
4.5/5
avatar
Michel P. 08/12/2023
quality
5/5
RAS
avatar
Cyrille V. 16/10/2023
quality
5/5
Après 11 ans de loyaux services, mon vieux F3D A2P* a rendu l'âme. J'ai reçu un A2P*** que vous recevrez par défaut maintenant même en comandant le A2P* (pour le même prix). Il est compatible et se monte bien sur la G371 comme sur la G372. Je l'ai remonté moi-même sur ma G371, sans problème. Un petit coup de Wd40 bienvenu au passage sur le mécanisme intérieur de la porte. Et c'est reparti pour un tour. Commandé lundi, reçu mercredi. Service client sympa et pertinent. Prix irréprochable. Je recommande.
avatar
Mehdi T. 01/04/2022
quality
5/5
Produit original
avatar
Jean S. 10/08/2021
quality
3/5
Ce cylindre est trop délicat